 |
MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile Saw by MK Diamond
Product DetailsManufacturer: MK Diamond Product features: - 159943 MK370EXP WET TILE SAW 7
- MK370EXP WET TILE SAW 7IN
Accessories:
Tools and Hardware Reviews of MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile SawCustomer Review: MK-370K 7" 1/2 HP Tile Saw Summary: 4 Stars
The MK-370K is an excellent value and has been the perfect workhorse for smaller tile jobs of around 300 square feet. The stand included is an added bonus that really adds convenience. This saw is very loud in addition to having all the normal puddle producing water splash of bigger saws. Because of this, you really can't operate in finished indoor areas or without the recommended hearing protection. I've used this saw for several months almost exclusively to cut 1/2"X 12" porcelain floor tiles with excellent results. The maximum depth of cut is rated at 1-3/4 inches. The 7-inch MK Premium Series blade that comes with the saw is a good blade for cutting ceramic tile, but is not intended for continuous cutting of porcelain tile, even though it did a good job with it for quite a while before replacement was necessary. You'll need to upgrade to the better MK Supreme Series or similar blade for this type of work. The saw has a sturdy plastic water tray that is easy to clean with the aid of a flexible mixing spatula. It doesn't come with a drain plug but you can get the small rubber push-in type from MK or a local Plumbing Supply and install it yourself. The water pump is a good quality unit made by Little Giant and has an adjustable output. It is easy to disassemble for cleaning and plugs into a receptacle on top of the motor that is controlled by the motor switch. It runs only when you're actually using the machine. I avoid the natural tendency to place the pump filter side down in the tray and instead place it filter side up to keep out tiny tile chips or slurry sediment then occasionally add water to the tray as needed during use to keep the pump intake submerged. Even with the heaviest saw use, it goes all day long without a clog or any reduction of water output. I have also begun putting a thin coating of Sil-Glyde silicone grease on the table slide rod and rollers once a day to help keep tile grit from binding them during use. This holds up to water splash better and lasts much longer than oil or spray lubes. Overall, I have been very pleased with this saw. Considering its capabilities and modest cost, I have no problem recommending it to anyone.
Description of MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile SawTile Saw with Stand features 7-inch portable wet-cutting tile saw with 18-inch rip, 13-inch diagonal, and 2-inch depth of cut1-1/4-horsepower engine for high torque (6,000 RPM) and power. Durable design--thermoplastic water reservoir; zinc-plated steel frame. Providing professional quality at an affordable price, the MK Diamond MK-370EXP 1-1/4-Horsepower 7-Inch Wet-Cutting Tile Saw with Stand has a lightweight yet powerful design ideal for both professionals and weekend warriors. Designed for wet cutting of tile and marble, this saw comes with submersible water pump, adjustable rip guide, and convenient folding stand. |
MK-370EXP Wet-Cutting Tile Saw with Stand At a Glance: - 7-inch portable wet-cutting tile saw with 18-inch rip, 13-inch diagonal, and 2-inch depth of cut
- 1-1/4-horsepower engine for high torque (6,000 RPM) and power
- Durable design--thermoplastic water reservoir; zinc-plated steel frame
- Includes 7-inch wet-cutting diamond blade, water pump, rip guide, and folding stand
- Backed by a one-year limited warranty
|
|  |
|

The variable-height cutting head allows for plunge cutting. View larger. | 
The head tilts to allow for precise, 45-degree miter cuts. View larger. | 1-1/4-Horsepower Motor and 7-Inch Blade for Powerful Performance Weighing in at just 33 pounds, the MK Diamond MK-370EXP Wet-Cutting Tile Saw is a compact powerhouse with a robust, 1-1/4-horsepower, 120-volt electric motor that turns the 7-inch blade at 6,000 RPM. It offers an 18-inch length of cut, 2-inch depth of cut, and diagonally cuts 13 inches, so you can take on different tile sizes and types. The conveyor cart gives precise, chip-free cuts on tile and marble, while the tilting head allows for precise 45-degree miter cuts.Precise Tracking and Alignment for Professional Results For optimum accuracy, the CSA-approved MK-370EXP comes equipped with a chrome guide-bar and linear bearing assembly for proper tracking and alignment. A folding stand gives you great stability and project flexibility, while a maintenance-free, self-lubricating pinion and gear-box assembly combine with an adjustable rip guide for precise alignment of materials. 
Sliding aluminum die-cast cutting table rips 18-inch tile. View larger. | Thermoplastic Water Reservoir and Thermal Water Pump To minimize downtime and increase its working life, the MK-370EXP features a 3-gallon thermoplastic water reservoir and a thermal water pump that delivers 95 gallons an hour. For added convenience, the reservoir won't rust or peel and removes easily for cleaning.Safe and Durable Design Durable and safe, the MK-370EXP has a single-piece, zinc-plated steel frame for rigidity and strength, as well as a hinged blade guard for accident protection and quick blade changes. There's also an MK-Safeswitch that prevents the saw from being operated when the locking key is removed. Dimensions and Warranty Information The MK-370EXP measures 33 by 19 by 20 inches (L x W x H), weighs 33 pounds, and is backed by a one-year limited warranty. About MK Diamond Founded in San Francisco in 1868 by Joseph Musto, a fifth-generation Italian stone-cutter and tile-setter, MK Diamond is a family business and world leader in precision power cutting tools and diamond blades. The company takes pride in its work, and is committed to making its products benchmarks by which the rest of the industry measures itself. What's in the Box MK-370EXP tile saw, 7-inch wet-cutting diamond blade, water pump, rip guide, and foldable stand (160131-MK).
Tile & Masonry Saws Tools
|
 |